Trouble shooting Indesit washing machine
Direct Answer to the Problem: The common problems that lead to these indicators include faulty capacitors in the machine’s board or a blocked filter. Fixing these issues might involve replacing the capacitors and cleaning the filter.
How to Fix an Indesit Washing Machine Showing a Tap Symbol or Flashing Light?
Understanding the Problem
If your Indesit washing machine has stopped mid-cycle and is showing a tap symbol or a flashing light, it’s signaling a problem that needs immediate attention. Often, these symptoms indicate an issue with the appliance failing to fill on the rinse cycle.
Replacing the Capacitors
One of the potential culprits when your Indesit washing machine stops and displays a flashing light could be faulty capacitors on the board.
Identifying Bad Capacitors
You can identify a bad capacitor by the following signs:
- It’s leaking a red liquid.
- Its top part is popping out or looks bumpy.
Replacing the Capacitors
In order to replace the capacitors:
- Access the board by unscrewing and removing the back of the machine.
- Identify and note down the specifications of each capacitor. Look for the value (measured in microfarads) and the voltage.
- Purchase replacement electrolytic capacitors with the same specifications.
- Make sure to observe the polarity when placing the new capacitors. They have a white line indicating the negative side.
- Once the new capacitors are in place, put the machine back together and test it.
Cleaning the Filter
If the capacitors are in good shape, then the issue could lie with a blocked filter.
How to Clean the Filter?
Cleaning the filter involves the following steps:
- Disconnect the appliance from power.
- Remove the bottom panel with a screwdriver.
- Unscrew and remove the filter, taking note of any debris blocking it.
- Clean the filter and the pipe, removing all the debris.
- Screw the filter back in place, ensuring it’s tight to avoid leaks.
- Put the panel back on and reconnect the machine to the power supply.
Frequently Asked Questions
Why is my Indesit washing machine flashing a tap symbol?
This usually indicates that the machine is failing to fill during the rinse cycle. It could be due to faulty capacitors or a blocked filter.
How can I fix my washing machine that stopped mid-cycle?
A: First, identify whether the problem is caused by faulty capacitors or a blocked filter. If it’s the capacitors, you’ll need to replace them. If it’s the filter, you’ll need to clean it out.
What do I do if the top part of the capacitor is popping out or looks bumpy?
A: This is a sign of a faulty capacitor, and you’ll need to replace it.
Conclusion
A tap symbol or flashing light on an Indesit washing machine signals an issue that needs addressing. However, by replacing faulty capacitors or cleaning a blocked filter, you can get your appliance running smoothly once more.
Key Points
- The tap symbol or flashing light on an Indesit washing machine usually indicates an issue with the rinse cycle.
- The common culprits are faulty capacitors or a blocked filter.
- You can fix these issues by replacing the capacitors and cleaning the filter.
Remember, safety first! Always disconnect the appliance from the power supply before attempting any repairs.
