The E15 error code on a Bosch dishwasher typically indicates a leakage problem. When this code appears, it means that the dishwasher’s anti-flood system has been triggered due to water leakage into the base of the machine. This could be caused by a variety of factors, such as a faulty pump, hose, or inlet valve, or even a problem with the door seal.

The E15 error code on a Bosch dishwasher typically indicates a water leak or overflow in the base of the dishwasher. When this error occurs, the dishwasher’s anti-flood system is activated to prevent further water from entering the appliance, and the drain pump runs continuously to remove any excess water.

How to Reset the E15 Error on Your Bosch Dishwasher

Bosch Dishwasher Error Code E15
E15 Bosch Dishwasher Error Code

To address the E15 error code on your Bosch dishwasher, follow these steps:

  1. Turn Off the Dishwasher: Switch off the dishwasher and unplug it from the power source to ensure your safety.
  2. Check for Leaks: Examine the area around and under the dishwasher for any signs of water leaks or pooling. If you find any water, try to identify the source of the leak. Common sources can include a faulty inlet valve, a damaged hose, or a loose connection.
  3. Inspect the Sump and Float Switch: The sump is the area at the bottom of the dishwasher where water collects. Check for debris or foreign objects that may be obstructing the float switch. The float switch is a small device that rises with the water level to trigger the anti-flood system.
  4. Remove Excess Water: Use towels or a sponge to remove any excess water from the base of the dishwasher. This will help prevent further activation of the anti-flood system.
  5. Fix the Leak: If you identified a specific source of the leak, such as a damaged hose or a loose connection, address the issue by tightening connections or replacing damaged parts. Make sure the dishwasher is properly leveled to prevent water from pooling.
  6. Reset the Dishwasher: Plug the dishwasher back in and turn it on. Run a short test cycle to see if the E15 error code reappears. If the issue has been resolved, the dishwasher should operate normally.
  7. Seek Professional Help: If you can’t identify or fix the source of the leak, or if the E15 error code persists even after addressing the issue, it’s recommended to contact a Bosch service technician or a qualified appliance repair professional for further diagnosis and repair.

Fixing the E15 Error: Solutions and Prevention

E15 Error Code on a Bosch Dishwasher
E15 Bosch Dishwasher Error Code

Let’s explore deeper into fixing the E15 error and preventing it from recurring:

Common Causes of E15 Error:

  • Excessive Dishwashing Soap: Overloading with detergent causes excess suds, triggering the error.
  • Broken Dishwasher Fixtures: Damaged parts can lead to leaks and the E15 error.
  • Faulty Water Tank or Hose: Poorly installed or damaged tank/hose may cause water seepage.

Solutions:

Wash Out Detergent Buildup or Excess Suds:

Replace Broken Fixtures:

    • Identify broken parts using the user manual.
    • Remove access panels and replace faulty fixtures as needed.

Replace Faulty Water Tank or Hose:

    • Locate leaks using access panels.
    • Replace damaged parts with guidance from the user manual.

Leaky Door Seal and the E15 Error: How to Address It

Bosch dishwasher the tray under the styrofoam disc
Bosch Dishwasher Error Code E15: How to Fix It

Is your Bosch dishwasher causing the E15 error due to a leaky door seal? We’ve got your back:

  1. Clear Both Corners: Food residue can affect the door seal’s efficiency. Use a spoon to remove any gunk.
  2. Clean Inner Door Seal: A seal runs along the door’s inside. Thoroughly clean it to prevent leaks.
  3. Use Kitchen Spray: Apply kitchen spray to break down grease and residue on the seal.
  4. Scrub with Toothbrush: Use an old toothbrush to ensure a clean seal all around.
  5. Resetting the E15 Error: If the error persists, follow the steps mentioned earlier to reset it.

Advanced Solution for E15: Getting to the Source

my bosch dishwasher if reading E-15
Bosch Dishwasher Error Code E15: How to Fix It

If the E15 error remains persistent, here’s an advanced solution:

  1. Slide the Machine: Move the dishwasher slightly forward and support it with blocks.
  2. Access the Bottom Panel: Reach underneath and pull out the tab to access the panel.
  3. Remove Screws: Unscrew the metal piece’s screws on both sides.
  4. Remove Insulation: Gently remove the insulation piece from the top.
  5. Dab Out Water: Reach in and dab out any accumulated water causing the error.
  6. Remove Sensor and Disc: If necessary, remove the sensor and polystyrene disc for thorough cleaning.
  7. Reassemble: Reassemble everything in reverse order and turn the power back on.

Summary: Get Your Bosch Dishwasher Working Again!

In summary, the E15 error on your Bosch dishwasher can be resolved by addressing common issues like excessive detergent, broken fixtures, and faulty water components. Leaky door seals can also trigger the error – make sure to keep them clean and well-maintained. For more advanced cases, accessing the bottom panel might be necessary. Follow our expert tips and step-by-step solutions to troubleshoot your dishwasher and enjoy spotless dishes once again.

Frequently Asked Questions

What does the E15 error mean on my Bosch dishwasher?

The E15 error indicates water trapped in the dishwasher’s base, often due to issues like excess suds, broken fixtures, or faulty water components.

How can I reset the E15 error on my Bosch dishwasher?

To reset the E15 error, pull out the dishwasher, turn off the power, tilt it back to drain water, turn the power back on, and enjoy a clear control panel.

What if the E15 error persists after following the steps?

For stubborn cases, follow the advanced solution by accessing the bottom panel, removing accumulated water, and cleaning the sensor and disc if needed.

Q: How can I prevent the E15 error from occurring?

A: Prevent the E15 error by using the right amount of detergent, ensuring fixtures are intact, maintaining water components, and keeping door seals clean.

Key Takeaways:

  • E15 error often caused by water accumulation in the base.
  • Excess suds, broken fixtures, and faulty components contribute to the error.
  • Simple steps to reset E15: pull out, tilt, and turn off/on power.
  • Leaky door seals can also trigger the E15 error.
  • Advanced solution: access bottom panel, remove accumulated water.
  • Prevent E15 by using correct detergent, maintaining fixtures, and clean seals.

Similar Posts

Leave a Reply