The Frigidaire Dishwasher Manual Drain Cycle refers to a set of troubleshooting steps and actions that you can take if your Frigidaire dishwasher is experiencing drainage issues. This process allows you to manually address and resolve drainage problems in your dishwasher, ensuring that it functions properly and effectively.

By following the steps outlined in the manual drain cycle, you can check for common issues that might be causing poor drainage and take corrective measures to restore the dishwasher’s normal operation. This includes examining the drain hose, inspecting for any obstructions or debris, and making sure all components are correctly reassembled after cleaning. The goal of the Frigidaire Dishwasher Manual Drain Cycle is to help users diagnose and solve drainage problems without the need for professional assistance, saving time and potential repair costs.

Problem-Solving Steps:

Why Your Frigidaire Dishwasher Won't Drain Water
Frigidaire Dishwasher Not Draining

If your Frigidaire dishwasher is not draining completely, leaving water in the bottom after a cycle, you can follow these troubleshooting steps to address the issue:

  1. Check for Knockout Plug Removal: If you’ve recently installed the dishwasher, ensure that the knockout plug inside the food waste disposer has been removed. This plug might obstruct proper drainage.
  2. Examine the Drain Hose: Inspect the drain hose for any kinks or twists that could be hindering the water flow. If your dishwasher is connected to a food waste disposer, make sure it’s empty and free of blockages.
  3. Verify Cycle Completion: Make sure the dishwasher cycle is fully complete and not paused midway. Sometimes, interruptions can cause drainage issues.
  4. Inspect the Glass Trap or Filter: Check the glass trap or filter for any debris that might be impeding the drainage process. If necessary, empty and clean the trap to ensure optimal performance.
  5. Remove and Clean the Glass Trap: To access the glass trap, rotate the handle 90 degrees clockwise while pressing down on the wash arm’s center. Lift the glass trap, clean it thoroughly, and then reassemble it.
  6. Reassemble Correctly: Ensure that all components are properly reassembled after cleaning. Press down on the arm’s center and rotate the glass trap handle 90 degrees counterclockwise to secure it in its original position.

Steps to Address Mid-Cycle Light Issue:

How to Clean a Dishwasher
Address Mid-Cycle
  • Start with Safety: Before proceeding, disconnect the dishwasher’s power supply to ensure your safety.
  • Access the Control Board: Using a T16 or T15 torx bit, remove the screws that allow you to access the control board.
  • Uncover Wiring and Components: With the cover removed, you’ll have a clear view of the wiring and components of the control board.
  • Disconnect Touch Panel: Remove the Phillips screws that secure the control board, and then disconnect the harness from the touch panel.
  • Terminal Arrangement Note: Pay attention to the terminal arrangement on the control board. Be cautious about any changes or differences compared to the old board.
  • Terminal Swap: If you notice a switch in terminal arrangement, carefully swap the terminals according to the color codes on the board.
  • Reassemble the Control Board: Reattach the control board, securing it with screws. Reconnect the touch panel harness.
  • Secure Top Panel: Place the top panel back in position and secure it with the appropriate screws.
  • Test and Confirm: Before fully reassembling, reconnect the power supply and test the dishwasher. Ensure proper functioning and that the mid-cycle light issue is resolved.

Frigidaire Gallery Dishwasher Not Draining:

Frigidaire Dishwasher not cleaning
Dishwasher Not Draining

If your Frigidaire Gallery dishwasher is not draining, it can be frustrating and may leave standing water in the bottom of the dishwasher. Here are some steps to troubleshoot and potentially resolve the issue:

1. Check for Obstructions:

  • Inspect the drain area inside the dishwasher for any food particles, debris, or objects that might be blocking proper drainage.

2. Verify Drain Hose:

  • Ensure that the drain hose is not kinked, pinched, or clogged. A blocked drain hose can prevent water from properly exiting the dishwasher.

3. Clean the Filter:

  • Locate the dishwasher’s filter and remove it. Clean it thoroughly under running water to remove any accumulated debris.

4. Clear the Garbage Disposal:

  • If your dishwasher is connected to a garbage disposal unit, make sure the disposal is clear and running smoothly. A clogged disposal can impact drainage.

5. Check for Air Gap Blockage:

What Are Dishwasher Air Gaps and Are They Necessary?
Understanding Dishwasher Air Gap Installations

6. Inspect the Drain Pump:

7. Run a Vinegar Wash:

  • Fill a cup with white vinegar and place it on the top rack of the empty dishwasher. Run a short cycle to help break down any built-up deposits and improve drainage.

8. Reset the Dishwasher:

  • Sometimes, a simple reset can resolve minor issues. Turn off the dishwasher and unplug it for a few minutes before plugging it back in and restarting.

9. Professional Help:

  • If none of the above steps resolve the issue, consider contacting a professional technician for further diagnosis and repair.

Additional Tips for Dishwasher Drainage:

  • If objects or clothing are obstructing the pump, carefully remove any obstructions to restore proper drainage.
  • In case of pump failure, test the motor’s continuity using a multimeter. If the motor doesn’t show continuity, replacing the pump is necessary.
  • Double-check the drain hose to ensure it’s not twisted, pinched, or obstructed. A clear path for water flow is essential for effective drainage.


With these steps and tips, you can troubleshoot and address drainage issues in your Frigidaire dishwasher. Following the provided guidelines, you can confidently diagnose and fix common problems, saving both time and potential repair costs. Remember to prioritize safety and thoroughness throughout the process to achieve successful results.

Frequently Asked Question

Why isn’t my Frigidaire dishwasher draining properly?

Check for knockout plug removal, inspect the drain hose, verify cycle completion, and clean the glass trap or filter.

What should I do if my dishwasher’s mid-cycle lights are on?

Follow safety precautions, access the control board, disconnect the touch panel, swap terminals if necessary, reassemble the control board, and test the dishwasher.

How can I address pump failure in a dishwasher?

Test the pump’s continuity using a multimeter. If there’s no continuity, consider replacing the pump to restore proper drainage.

Key Takeaways:

  • Troubleshoot and address drainage issues step by step to save time and costs.
  • Safely disconnect the power supply before any repairs.
  • Pay attention to terminal arrangements on the control board, and swap if needed.
  • Verify all components are reassembled properly before testing.
  • Address pump failure and hose obstructions for effective dishwasher drainage.

Similar Posts

Leave a Reply