Resetting a Bosch dishwasher refers to the process of restoring the dishwasher to its default settings or resolving any issues that might be affecting its normal operation. It is a straightforward procedure that can often fix minor glitches, error codes, or software-related problems. When you reset the dishwasher, it clears any error codes, drains any existing water, and prepares the dishwasher for a fresh start.

Step 1: Setting the Cycle

  1. Press the power button to turn on your Bosch dishwasher.
    How To Start a Bosch Dishwasher
    How to Fix Your Bosch Dishwasher and Restart It
  2. Use the cycle selection buttons to choose the desired cycle. For example, if you want a heavy wash, select the “Heavy” cycle.

Step 2: Entering Reset Mode

  1. Once you’ve selected the cycle, you might realize you want to change it or start over. Here’s the trick: Do not start the dishwasher just yet.
  2. If you need to change the cycle, you cannot do it directly; you’ll need to reset the dishwasher first. Don’t worry; it’s a straightforward process.

Step 3: Initiating the Reset

  1. Locate the “Start/Resume” button on the control panel. It’s usually situated on the front of the dishwasher.
  2. Press and hold the “Start/Resume” button for about three to four seconds. You should notice the display showing “01” or a similar number. This indicates the reset process has begun.

Step 4: Wait for the Reset

  1. Once you’ve initiated the reset, close the dishwasher door securely. The dishwasher will now drain any existing water at the bottom.
  2. During this process, the dishwasher’s computer will reset, clearing any error codes and preparing for the new cycle.

Step 5: Completing the Reset

  1. After the dishwasher drains the water and completes the reset process, it’s ready to start a new cycle.
  2. To start a different cycle, simply turn off the dishwasher by pressing the “Off” button.
  3. Wait a moment, then turn it back on. Now you can select a new cycle according to your preferences.

How to Reset a Bosch Dishwasher in 5 Different Ways

1. Soft Reset (Control Panel Reset)

How to Reset a Bosch Dishwasher
The Best Way to Reset a Bosch Dishwasher

A soft reset is a quick and easy way to reset your Bosch dishwasher without interrupting its current cycle. Here’s how to perform a soft reset:


  1. Press and hold the “Start/Resume” button for about 3-5 seconds until the dishwasher’s display turns off.
  2. Wait for a few seconds, then press the “Start/Resume” button again to power on the dishwasher.
  3. The dishwasher’s control panel will now be reset, and it’s ready for you to select a new cycle.

2. Cancel-Drain Reset

How to Force Cancel & Drain a Bosch Dishwasher
Bosch Dishwasher Reset

The cancel-drain reset is effective when your Bosch dishwasher is experiencing drainage issues or displaying error codes. Follow these steps to perform the cancel-drain reset:


  1. Open the dishwasher door and press the “Cancel” button.
  2. Close the door securely to start the drain cycle.
  3. Wait for the dishwasher to complete the drain cycle and release any trapped water.
  4. After the cycle ends, the dishwasher’s system will be reset.

3. Hard Reset (Manual Reset)

If the soft reset didn’t work, you can try a hard reset, which involves cutting off power to the dishwasher completely. Here’s how:


  1. Locate the dishwasher’s circuit breaker or unplug it from the power source.
  2. Leave it disconnected for about 5 minutes to ensure a complete power cycle.
  3. Reconnect the power or flip the circuit breaker back on.
  4. The dishwasher will now be reset to its default settings.

4. Factory Reset

Performing a factory reset restores your Bosch dishwasher to its original factory settings, erasing any custom settings you’ve made. Here’s how to do it:


  1. Turn off the dishwasher and unplug it from the power source.
  2. Press and hold the “Power” button while plugging the dishwasher back in.
  3. Continue holding the “Power” button for about 5 seconds or until you see the display change.
  4. Release the “Power” button, and the dishwasher will now be restored to factory settings.

5. Child Lock Reset

How to Get the Child Lock off a Bosch Dishwasher
Bosch dishwasher child lock problem

If the child lock feature is enabled on your Bosch dishwasher and you need to reset it, follow these steps:


  1. Locate the “Child Lock” button on the control panel.
  2. Press and hold the “Child Lock” button for about 3 seconds until the lock indicator turns off.
  3. The child lock feature will now be reset, and you can use the dishwasher as usual.

How to Reset Bosch Models With No Cancel Drain Function

If your Bosch dishwasher model does not have a “Cancel Drain” function, don’t worry; you can still perform a reset using alternative methods. Here’s how:


  1. Open the dishwasher door and locate the “On/Off” button on the control panel.
  2. Press and hold the “On/Off” button for about 10-15 seconds until the dishwasher turns off completely.
  3. Wait for a few seconds, then press the “On/Off” button again to power on the dishwasher.
  4. The dishwasher will now be reset, and you can proceed with selecting a new cycle.

How to Reset Bosch Dishwashers With a Cancel Drain Function

For Bosch dishwashers equipped with a “Cancel Drain” function, performing a reset is straightforward. Here’s how to do it:


  1. While the dishwasher is running, press and hold the “Cancel Drain” button for about 3-5 seconds.
  2. The dishwasher will stop the current cycle and begin the drain process.
  3. Wait for the dishwasher to complete the drain cycle and power off.
  4. Press the “On/Off” button to turn on the dishwasher again.
  5. The dishwasher is now reset and ready for a new cycle.

How to Clear a Bosch Dishwasher Error Code

Encountering an error code on your Bosch dishwasher can be frustrating, but clearing it is usually simple. Follow these steps to clear a Bosch dishwasher error code:


  1. Identify the specific error code displayed on the dishwasher’s control panel.
  2. Refer to the Bosch dishwasher manual or website to find the meaning of the error code.
  3. Once you understand the error, address the underlying issue, such as cleaning a clogged filter or checking the water supply.
  4. After resolving the problem, press the “On/Off” button to reset the dishwasher and clear the error code.

Interpreting Bosch Dishwasher Error Codes

Bosch dishwashers may display error codes to indicate various issues. Understanding these error codes can help you diagnose and fix problems efficiently. Here are some common Bosch dishwasher error codes and their interpretations:

  1. E01 or E17: Water level too high (usually due to a blocked filter or drain).
  2. E02 or E22: Water level too low (usually caused by a defective water inlet valve or clogged water supply).
  3. E24: Drain error (often caused by a clogged drain pump or hose).
  4. E25: Blocked drain pump (check for debris obstructing the pump).
  5. E09: Heating element issue (could be a faulty element or thermostat).
  6. E15: Water in base pan (usually triggered by a leak, requiring professional inspection).

Troubleshooting: Dishwasher Not Draining

If your Bosch dishwasher is not draining properly after the reset, here are some additional steps you can take to address the issue:

  1. Check the Air Gap: Locate the air gap, typically positioned near the kitchen faucet. Remove the silver cap and the white cap underneath, and check for any debris or clogs. Clean it thoroughly if needed.

Silence Plus 44 dba Reset

To reset a Bosch Silence Plus 44 dBA dishwasher, you can follow these steps:


  1. Open the dishwasher door.
  2. Press and hold the “Start” button for about 3-5 seconds.
  3. The display may show “0:00” or “0:01,” indicating that the dishwasher is in reset mode.
  4. Release the “Start” button.
  5. Close the dishwasher door securely.
  6. The dishwasher will drain any existing water and reset its control panel.
  7. Wait for a moment, then you can open the door, select a new cycle, and start using the dishwasher.

Frequently Asked Questions (FAQs)

Why should I reset my Bosch dishwasher?

Resetting the dishwasher can resolve various issues, such as cycle errors or software glitches, allowing you to start anew.

How long does the reset process take?

The entire reset process takes just a few seconds. It’s a quick and straightforward procedure.

Will resetting the dishwasher erase my settings?

Yes, the dishwasher will return to its default settings after the reset. Make sure to reselect your preferred cycle.

Can I reset other dishwasher brands using the same method?

Yes, the reset process is quite similar for many dishwasher brands, including Thermador and Siemens.

My display reads 0:00 or 0:01. What does that mean?

Seeing “0:00” or “0:01” on the display usually indicates that the dishwasher is in a reset mode, and it’s trying to cancel the current settings to start a new cycle.

My control panel is unresponsive. What’s happening?

An unresponsive control panel may indicate a software glitch or electrical issue. Try a soft reset by holding the “Start/Resume” button for a few seconds to reboot the dishwasher.

Why Do Dishwashers Need a Reset?

Dishwashers may need a reset to resolve software glitches, clear error codes, or restart the system after encountering issues. Resetting restores the dishwasher to its default settings, often fixing minor malfunctions.

What If It Still Isn’t Working?

If the dishwasher still isn’t working after a reset, there may be underlying mechanical or electrical problems. Check for clogged filters, blocked drain lines, or faulty components. If troubleshooting doesn’t solve the issue, it’s best to consult a professional technician for diagnosis and repair.


Now that you know how to reset your Bosch dishwasher, you have the power to troubleshoot and tackle minor issues on your own. The reset process is easy and can save you from unnecessary stress or service calls. Remember to follow the steps precisely and enjoy your dishwasher working smoothly again!

Key Takeaways

Similar Posts

Leave a Reply