Short answer: When your Samsung dryer stops working, start by ensuring the door is fully closed and the child lock isn’t activated. If it persists, check the circuit breaker and consult the manual.

When your Samsung dryer suddenly stops working, it can be frustrating and inconvenient, leaving you with a pile of damp laundry. However, before panicking or rushing to call a technician, there are several troubleshooting steps and actions you can take to identify and potentially resolve the issue. In this guide, I will explore a series of practical steps to help you understand why your Samsung dryer may have stopped working and what you can do to get it up and running again. From checking simple things like the door latch to more advanced diagnostics, I’ll provide you with a comprehensive approach to tackle common problems and keep your dryer functioning efficiently.

Why Does My Samsung Dryer Stop Working All Of A Sudden?

If your Samsung dryer stops working all of a sudden, it could be due to various reasons. Common issues that may cause sudden dryer malfunctions include a tripped circuit breaker, a faulty power cord, problems with the terminal block, or issues with the control board. It’s essential to check the circuit breaker for any tripped switches and reset them if necessary. Inspect the power cord for damage or loose connections, and ensure the terminal block on the dryer’s back is intact and not damaged. If these components are in good condition, it may indicate a problem with the control board, which might require professional diagnosis and potential replacement to restore the dryer’s functionality.

What To Do When Samsung Dryer Stops Working?

Whirlpool dryer not working
Fixing Whirlpool dryer

Fixing the Samsung dryer Won’t Start But Has Power

Step 1: Access the Dryer Interior:

  • Lift the top panel of the dryer. It should hinge upwards, allowing you to prop it against the wall.
  • Examine the drum belt. If it’s loose or off the drum, it’s a sign of a potential problem with the idler pulley.

Step 2: Remove the Front Panel:

  • Disconnect any wires attached to the front panel.
  • Remove the screws securing the front panel to the dryer. Typically, there are screws at the top and possibly at the bottom.
  • Once the screws are removed, lift the front panel out and set it aside.

Step 3: Access the Idler Pulley Area:

Checking idler pully
Fixing idler pully
  • With the front panel off, you’ll have access to the idler pulley area.
  • Locate the idler pulley; it’s usually near the motor.
  • Check the idler pulley for any visible damage, such as wear or breakage. Replace it if necessary.

Step 5: Remove and Replace the Idler Pulley:

  • If the idler pulley needs replacement, locate the retaining clip that holds it in place.
  • Use a screwdriver to carefully remove the retaining clip.
  • Slide the old idler pulley off the shaft.

Step 6: Install the New Idler Pulley:

  • Slide the new idler pulley onto the shaft in the same position as the old one.
  • Reattach the retaining clip to secure the idler pulley in place.

Step 7: Reassemble the Dryer:

  • Carefully place the drum belt around the drum and ensure it’s properly centered in the groove.
  • Reassemble the front panel by attaching any wires and securing it with the screws.
  • Reattach the top panel by lowering it back into position.

Step 8: Connect the Vent Tube and Power:ong>

  • Reconnect the vent tube to the back of the dryer.
  • Plug the dryer back into the power outlet.

Step 9: Test the Dryer:ong>

  • Power on the dryer.
  • Check if the “filter check” light still appears and if the dryer starts.
  • Start a drying cycle to ensure that the dryer operates correctly.

Fixing Samsung Dryer Not Turning On

To troubleshoot and potentially fix a Samsung dryer that has stopped working, follow these steps:

Step 1: Check the Door: Ensure that the dryer door is fully closed and securely latched. If it’s not closed properly, the dryer may not start, and you could receive an error code. Make sure the door is securely shut.

Step 2: Child Lock Function: Verify that the child lock function has not been activated. The child lock can prevent the dryer from starting. Refer to your dryer’s manual on how to deactivate the child lock if needed.

Step 3: Check the Power Cord: If the dryer stops in the middle of a cycle or doesn’t start, check the power cord. Ensure it is not loose and is firmly plugged in. A loose power cord can interrupt the power supply to the dryer.

Step 4: Check the Circuit Breaker: If the dryer’s panel is blank, the lights won’t turn on, or the dryer turns off completely, inspect your home’s circuit breaker. Make sure it hasn’t tripped. If it has, reset the breaker to restore power to the dryer.

Fixing Samsung Dryer Sut Off Mid-Cycle

Step 1: Reset the circuit breaker: Reset the circuit breaker as in Scenario 1 to ensure that the dryer is receiving power. If the control does not come back on after resetting the breaker, proceed to the next step.

Step 2: Check the power cord: Examine the power cord for any visible issues.

Checking power cord
Inspecting power cord

Step 3: Test voltage at the terminal block: Use a multimeter to test for voltage at the terminal block on the back of the dryer. You should measure 120 volts across the two inner screws and 240 volts across the two outer screws. Proper voltage ensures that the control board is receiving power.

Step 4: Inspect the control board: If the control board is not receiving power, and all other components are in working order, there may be an issue with the control board itself. To check the control board, disconnect the dryer from the wall and remove the top panel to access the control board. Measure the voltage on the black wire from the motor relay connector to ensure that power is reaching the control board.

Step 5: Consider control board replacement: If the dryer’s display does not light up when attempting to start it, and power is verified to reach the control board, it is likely that the control board is faulty.


How can I prevent my Samsung dryer from overheating?

To prevent overheating, regularly clean the lint filter before or after each cycle. Ensure that the dryer vent and exhaust ducts are clear of lint buildup. Avoid overloading the dryer, as this can cause it to overheat.

Why is my Samsung dryer making unusual noises during operation?

Unusual noises can be caused by various factors, such as foreign objects in the drum, loose or worn parts, or issues with the dryer’s motor. Check the drum for any foreign objects and tighten any loose components. If the problem persists, consider contacting Samsung support.

How often should I clean the lint filter in my Samsung dryer?

It’s recommended to clean the lint filter before or after each drying cycle. Regular cleaning helps maintain the dryer’s efficiency and reduces the risk of overheating and lint fires.

Can I use my Samsung dryer for all types of fabrics?

Samsung dryers come with various drying cycles designed for different fabric types. Always refer to the garment care labels and select the appropriate drying cycle for the type of fabric you are drying to avoid damaging delicate items.

What should I do if my Samsung dryer displays an error code?

Error codes provide diagnostic information about the issue. Consult your dryer’s manual to identify the specific error code and its meaning. In most cases, you can resolve the problem by following the recommended troubleshooting steps in the manual.

How do I maintain my Samsung dryer for optimal performance?

Regular maintenance includes cleaning the lint filter, checking and clearing the dryer vent and exhaust ducts, and inspecting the power cord for any damage. Ensure the dryer is on a level surface to prevent vibration and noise issues.


When your Samsung dryer stops working, it’s essential to begin with a systematic troubleshooting approach. Check for common issues like a fully closed and latched door, the activation of the child lock function, or a tripped home circuit breaker. Regular maintenance, such as cleaning the lint filter and ensuring proper ventilation, can help prevent problems. If the issue persists, consult your dryer’s manual for error code information and recommended troubleshooting steps. Taking these steps can help diagnose and resolve the problem efficiently, ensuring your Samsung dryer continues to provide reliable performance.

Similar Posts